UV 355nM Laser System

AOM Q-switched UV Laser System
Wavelength: 355nM

UV Laser System
  • AOM Q-switched
  • TEMoo ~95%
  • Internal Temprature Stablizer
  • Stable Output Power
  • On/Off Key Lock Switch
  • Function Panel Display
  • Optional Fiber Coupling
  • Optional Computer Interface
  • Wide Operating Temperature
  • CDRH Complied
  • AOM (High Speed Q-Switched via Acousto-Optic Modulator) Laser System
    Item No. U/price l (nm) Pulse Energy (at 1KHz) Pulse Duration (at 1KHz) Max. Pulse Repetition Rate Average Output Power
    UVSQAOM355-20 $16,995.00 355 20 µJ < 10 nsec 10 KHz > 30mW
    UVSQAOM355-20S
            GARNET
    $19,995.00 355 20 µJ (200 Hz) < 5 nsec (200 Hz) - -


    Item No.: UVSQAOM355-20

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan

    • Wavelength, nm: 355
    • Max. value of Average Pulse Energy at 0.01 - 2 kHz, µJ: 20 ± 15%
    • Max. value of Average pulse energy at the range single pulse - 0.01 kHz, µJ: 20 ± 25%
    • Max. Value of Average Output Power (typically at 3 kHz), mW: >35
    • Wavelength rejection 532nm/1064nm emissions, % of UV: <0.1
    • Mode of Operation: Q-switched with AOM, ext./int. triggering/through RS-232
    • Range of Pulse Repetition Rate, kHz
      • Ext. Triggering*: single pulse ~ 10
      • Int. Triggering: through RS-232**: 0.01 - 10
      • without PC***: 1
    • Pulse-to-pulse Stability - StDev/Mean (at 0.01 - 2.0 kHz nominal 1 hour): <10%
    • Pulse Duration (at 2 kHz, FWHM), ns: 5 ± 2
    • Divergence (full angle, at 4 kHz), mrad: 5.0 ± 0.6
    • Beam Profile****: TEMoo
    • Beam Diameter (at 4 kHz, at laser aperture), mm: 0.7± 0.2
    • Beam Ellipticity: <1.75 : 1
    • Beam Height, mm: 33.5 ± 0.5
    • Polarization Linearity: >100:1, horizontal (±5)
    • Output beam pointing stability (std dev, at 2 kHz), µrad: <100
    • Laser Trigger to Sync Out Pulse****** (at 0.01 - 2.0 kHz, Average Pulse Energy 20 ± 10µJ), ns
      • Time Delay: 300 / 250
      • Jitter, FWHM: < 8
    • Laser Emission to Sync Out Pulse ****** (at 0.01 - 2.0 kHz, Average Pulse Energy 20 ± 10µJ), ns
      • Time Delay: < 50
      • Jitter: < 2
    • External Trigger (Input signal):
      • Pulse Amplitude, V: +5 ± 10%
      • Pulse Duration, ns: >1 and <20
      • Rise Time, ns: <100
      • AC impedance, kOhm: 1
    • Output Sync Pulse (Output signal):
      • Pulse Duration, ns: 2.5 ± 30%
      • Pulse Amplitude, V: 5 ± 10% (R=50 Ohm)
      • Rise Time, ns: <10
    • Operating Temp/Humidity Range: 15 - 35°C /Up to 80%, non-condensing
    • Shipping Temp/Humidity Range: -40 to 50°C / Up to 80% humidity at 25
    • Dimensions (without connectors), mm (L x H x W)
      • Laser Head: max 299 x 90 x 55
      • Laser Head with Heat Sink: max 299 x 122 x 90
      • Power Supply*******: 150 x 43 x 93 (x 115 with key)
      • Power Supply with Heat Sink: 150 x 110 x 93 (x 115 with key)
    • Operating voltage
      • without AC/DC adapter, V: 12 ± 10% V DC
      • with AC/DC adapter, V: 90 - 264 V AC
    • Current consumption, A: < 6
    • Warm Up Time: 10 min
    • Remote control of laser parameters, (Ext./Int. Triggering, ON/OFF, pulse repetition rate, pulse energy): via RS-232 interface
    • Frequency of exchange via interface RS-232: 4800b / per second
    • Laser Class (CDRH): IIIb
    • Compliance: CDRH, CE
    • Weight, kg:
      • Laser head: 2.0
      • Power supply unit: 1.6
      • Fan heat sink of Laser Head: 1.0
      • Fan heat sink of Power Supply: 1.0
  • * Triggering with external electric pulse generator; generator is not included in delivery set.
  • ** Generation of periodical laser pulses using PC, step 0.01 kHz. Average energy may be changed by software from 10% up to maximum value.
  • *** Generation of periodical laser pulses at 1 kHz rep. rate; external generator and/or PC are not needed.
  • **** Gaussian shape of beam profile allows focusing into extremely small sport ( 1 Ám).
  • ***** Beam waist is placed approximately 100 mm behind the front panel of laser head (inside of laser head).
  • ****** Sync Out signal is generated by pulse of laser light.
  • ******* Without AC/DC adapter AS-120P-12 (12 V DC).

  • Item No.: UVSQAOM355-20S
    GARNET

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser

    AOM Q-switched System

    Heat Sink Fan

    Spot 1

    Spot 2

    • Wavelength: 355 nm
    • Collateral radiation (wavelengths 532nm/1064nm): < 0.1% of UV
    • Average Pulse Energy (200 Hz nominal): 20 ± 10% µJ
    • Energy Stability - StdDev/Average (at 200 Hz, 20 mJ nominal, 1 hour): < 10%
    • Laser Pulse duration, FWHM: 5 ± 2 ns (at 200 Hz)
    • Rep Rate: External Triggering: 200 Hz
    • Polarization: Linear, >100:1, ±5° to horizontal
    • Divergence (full angle at 50% energy): 3.4 ± 0.5 mrad
    • Beam Diameter (at 50% energy): 400 ± 100 mm as measure at the laser aperature
    • Beam Profile: Gaussian*
    • Beam ellipticity*: < 1.75 (typ.1.2-1.4)
    • Beam Height: 33.5 mm ± 0.5 mm
    • Output Beam Static alignment tolerance: ± 0.25 mm
    • Output Beam Angular Tolerance: ± 2.5 mrad
    • Output Beam pointing stability (std dev,1 hour): < 100 µrad
    • Laser Trigger to Sync Out Time Delay **: 400 ns ± 200 ns
    • Laser Trigger to Sync Out Jitter, FWHM **: <8 ns
    • Laser Emission to Sync Out Pulse Time Jitter: < 5 ns
    • Laser Emission to Sync Out Pulse Time Delay: < 50 ns
    • External Trigger (Input signal):
      • Pulse Amplitude: +5 V ± 10%
      • Pulse duration: >1 and <20 ms
      • Rise Time: <100 ns
      • AC impedance: 1 kOhm
    • Output Sync Pulse(output signal):
      • Pulse Amplitude: +5 V ± 10% (R load =50 Ohm)
      • Pulse duration: 2.5 ms ± 30%
      • Rise Time: <100 ns
    • Control connector allows to turn on / turn off pumping (remotely) by means of mechanical switching or by means of TTL-signal: 0 - 1 V - pumping on 3.5 - 5 V - pumping off
    • Input Voltage: 24 V ± 2.4 V DC
    • Current consumption: < 4 A
    • Weight: Laser - < 2.0 Kg, Power supply - < 1.6 Kg
    • Size: Laser - 55 x 90 x 299 mm, Power Supply - 66 x 90 x 185 mm
    • Operating Temp/Humidity Range: 15-35 °C, up to 80% non condensing
    • Shipping Temp/Humidity Range: -50-+50 °C, up to 80% humidity at 25 °C
    • Power dissipation: Laser - < 60 W, Power supply - < 40 W
    • Warm up time: < 10 min.
    • Compliance: CDRH, CE, EN 61000-95, GOST 23088-80 tested
    • *Gaussian shape of beam profile allows focusing into extremely small spot (~1 mm).
    • **Sync Out signal is generated by pulse of laser light.
    • Beam waist is placed approximately 100 mm behind the front panel of the laser head.

    MeshTel INTELITE, INC. USA   Tel: 775 267 5959, Fax: 775 267 5958
  • Prices are FOB Minden, USA and subject to change without notice.
  • Disclaimer: The specifications are subject to change without notice.


    What's New |  Hot Buy's |  Quotation |  Place Order |  F A Q |  About Us |  Legal

    © 1996 - 2018 MeshTel INTELITE INC.